Lithium Battery Charger

E.D.S. offers a line of fully controlled lithium chargers designed to properly return capacity to a lithium battery without fear of overcharge. We offer dedicated models designed to be used with either a 1, 2, or 3 cell battery. In addition, we offer a desk top unit that is auto-sensing so that the same charger can be used with either a 1, 2, 3 or 4 cell battery. Both models offer a universal input feature so the unit will operate from 100-240 V for wordwide use.

     
Dedicated
1, 2 , or 3-Cell Battery

Auto Sensing
1-4 cell Battery
 

Intended Use
500 mAh - 5 Ah

   Intended Use
1 Ah - 10 Ah
     
Input
100-240 V, 50/60 Hz		   Input
100-240 V, 50/60 Hz
     
Charge Rate
500 mA		   Charge Rate
1000 mA
     
Output Voltage
4.2 V (1-cell)
8.4 V (2-cell)
12.6 V (3-cell)
   Output Voltage
Auto Sense (4.2 - 16.8V)
     
Output Connector
Any EDS Standard (see options)

Non stanadrd plugs available upon request. 		  Output Connector
Any EDS Standard (see options)

Non stanadrd plugs available upon request.
     
LED Indicator
Dual color red/green indicator
(see operation manual)		   LED Indicator
Dual color red/green indicator
(see operation manual)
     
Features
• Over Voltage Protection
• Short Circuit Protection
   Features
• Over Voltage Protection
• Short Circuit Protection
     
Options
E.D.S. stocks this charger with US blades for use in North America. Versions with optional blade styles available although there may be a minumum quantity requirement. 		  Input Cordset
Each charger is equipped with a US two prong input cordset.
     

 

 
Last updated: 01 02 08